AEC Slope
Infocard
| ||||||||||||||||
|
Buy Solpe Analyzer on AutoCAD-Swedish slip ci
|
5.58 Mb |
Contents
Description by the Publisher
Earth embankments are widely used for roads, railways, river training works, canal embankments, dams, etc. The main economy and safety of these works can be accomplished by adopting proper and economical methods of design. Failure of these structures is likely to result in loss of life and damages to property. It may also result in damage and/or washout of the structure fully or partially.
AEC Slope is used for analyzing stability of slopes for the above structures and reporting safety factors.
The failure of these structures is likely to result in loss of life and damages to property. AEC Slope is used for analyzing stability of slopes for the above structures and reporting safety factors.
Normally most of the computer programs available on this solution provide direct end output of safety factors without any element or slice wise supported calculation/proof check as required by the methods specified in standard codes and manuals. But the AEC Slope provides an accurate solution what is required for a designer to assess adequacy of safety factor and its proof of arriving such values so as to enable him to modify suitably the required section directly on the output drawing itself.
Limitations in the Downloadable Version
Download a fully functional trial of AEC Slope 2009 by clicking on the "Download" link below. We are confident that during the trial period (1 days or 7 runs, whichever is earlier) you will find AEC Slope 2009 extremely useful. Later when you decide
Product Identity
Unique Product ID: PID-8000A144A303
Unique Publisher ID: BID-C3000DD2EAC0